-
HPG Series Double column moving gantry milling machine 
-
HPG Series Double column moving gantry milling machine
- No.DL1220
- BrandHirung
- Weight:15500KG
Column moving gantry Machine
Column moving gantry Machine
Difference between table moving & column type
|
|
Table Moving type |
Column Moving type |
|
Loading weight |
according to machine design weight, not overweight. |
The workpiece weight has no effect on the machine tool, so long as it can be put down, it can be machined. |
|
Speed |
The speed is heavy load, the movement is labored, the speed is slow, the guide rail is worn. |
It has nothing to do with the weight of the workpiece. The speed of movement is consistent with the design speed of the machine tool. It has high speed, high precision, high efficiency and high life. |
|
Guide rail wear |
long loading heavy industry, accelerate the wear of guide rail, cause precision loss, shorten machine life. |
The moving parts are designed to be stable, wear least and uniform, long life and low wear. |
|
Accuracy keeps |
the weight of the workpiece uncertain, the guide rail, the screw wear is not sure, unstable, wear quickly. |
The moving parts are all designed with no change impact, so the long-term use of precision is good. |
|
Athletic performance |
workpiece weight gap is too big to two or morethings, servo system debugging can only choose a reference weight, but the actual process, because of the large gap between light fast, heavy load, so can't consistent accuracy. Accuracy is punctuality and error. |
Machine tool movement has always been consistent, at the time of debugging to debug machine tool based on the actual load data, compensation, since mobile basic constant weight, so can get high precision machine tools. |
|
Processing accuracy |
workbench itself weight plus workpiece weight, moves to produce hysteresis, and generally adopts planetary gear transmission, prone to lag during deceleration or cutting, precision can't guarantee. |
The moving piece weight is fixed, and the X axis adopts double servo direct drive, which effectively guarantees the machining accuracy. |
|
Floor space |
The size of the machine tool is 2.5 times the length of the worktable |
Small floor area, the machine tool that same processing ability is only mobile desktop machine tool is less than 60 %. |
|
Processing area |
X axis guide rail and protective range in the lower part of machine tool, so the process of dust and debris, and cutting fluid can easily enter the guide rail, accelerated wear and difficult to protection, and reduce the quality of rail oil lubrication. The cutting fluid of guide oil can also lead to the cutting fluid. |
All axial guideway and protective above the workpiece, easy protection, so there is no need to consider the processing of debris, dust and cutting fluid into the guide rail, so guide better protection, including rail oil will separate collection, not into the cutting fluid. |
|
The workpiece scope |
The workpiece scope must be within the range of travel. The worktable is always moving when processing, and no other workpiece can be mounted. |
In the case of safety, you can consider the different types of workpiece in the side processing side, or the side loading side. |
Machine parameters
|
term |
SP1810HPG |
SP2216HPG |
SP3016HPG |
SP4016HPG |
SP3020HPG |
|
Travel (X/Y/Z)mm |
2000*1050*550 |
2500*1600*800 |
3200*1600*800 |
4200*1600*800 |
3200*2000*1000 |
|
Table size (mm) |
1900*1000 |
2200*1600 |
3000*1600 |
4000*1600 |
3000*2000 |
|
Max feeding Height |
730 |
950 |
950 |
950 |
1150 |
|
Spindle taper |
BT50 |
||||
|
Power |
12/18KW 115/172NM |
SIEMENS :16/20KW 162/243NM FANUC :15/18.5KW 143/177NM |
|||
|
Spindle RPM |
8000rpm(Belt） |
||||
|
Rapid feed rate (X/Y/Z) |
20/20/20M/min |
||||
|
Max feeding width |
1300 |
2000 |
2000 |
2000 |
2400 |
|
Machine weight（Tom) |
15.5 |
25 |
30 |
33 |
38 |
|
Machine size |
4800*3150*2800 |
5200*4000*3400 |
6000*4000*3400 |
7000*4000*3400 |
6000*4000*3600 |
|
term |
SP4025HPG |
SP6025HPG |
SP6030HPG |
SP8030HPG |
SP12030HPG |
|
Travel (X/Y/Z)mm |
4200*2500*1200 |
6200*2500*1200 |
6200*3000*1200 |
8200*3000*1200 |
12200*3000*1200 |
|
Table size (mm) |
4000*2100 |
6000*2100 |
6000*2600 |
8000*2600 |
12000*2600 |
|
Max feeding height |
1500mm(can be customized） |
||||
|
Spindle taper |
BT50 |
||||
|
Spindle power |
28/42KW 268/401NM(gearbox1070/1604NM)
|
||||
|
Spindle RPM |
8000rpmBelt）/Gearbox6000rpm(op) |
||||
|
Rapid feed rate (X/Y/Z) |
20/20/20M/min |
||||
|
Max feeding Width |
3160 |
3160 |
3600 |
3600 |
3600 |
|
Machine weight （Tom) |
42 |
52 |
58 |
70 |
115 |
|
Machine Size mm |
7500*6100*4000 |
9500*6100*4000 |
9500*6600*4000 |
11500*6600*4000 |
15500*6600*4000 |
|
Control system |
SIEMENS 828D |
840D |
|||
|
term |
SP4035HPG |
SP6035HPG |
SP8035HPG |
SP12035HPG |
|
Travel (X/Y/Z)mm |
6200*4000*1200 |
6200*4000*1200 |
8200*4000*1200 |
12200*4000*1200 |
|
Table size (mm) |
4000*1800 |
6000*1800 |
8000*2600 |
12000*2600 |
|
Max feeding height |
1500mm(can be customized） |
|||
|
Spindle taper |
BT50 |
|||
|
Spindle power |
28/42KW 268/401NM( gearbox 1070/1604NM) |
|||
|
Spindle RPM |
8000rpm(Belt ）/Gearbox6000rpm(op) |
|||
|
Rapid feed rate (X/Y/Z) |
20/20/20M/min |
|||
|
Max feeing width |
3500 |
|||
|
Machine weight （Tom) |
48 |
58 |
70 |
115 |
|
Machine size mm |
7500*6600*4000 |
9500*6600*4000 |
11500*6600*4000 |
15500*6600*4000 |
|
Control system |
SIEMENS 828D |
840D |
||
